Analyses on Engineering Mechanics of Robotic Arm for Sorting Multi-Materials

View Sample PDF

Author(s): Zol Bahri Razali (Universiti Malaysia Perlis, Malaysia), Mohamed Mydin M. Abdul Kader (Universiti Malaysia Perlis, Malaysia), Mohd Hisam Daud (Universiti Malaysia Perlis, Malaysia)and Khor Wen Hwooi Stephen (Universiti Malaysia Perlis, Malaysia)
Copyright: 2020
Pages: 33
Source title: Handbook of Research on Advanced Mechatronic Systems and Intelligent Robotics
Source Author(s)/Editor(s): Maki K. Habib (The American University in Cairo, Egypt)
DOI: 10.4018/978-1-7998-0137-5.ch008

Keywords: Artificial Intelligence / Computer Science & IT / Information Science Reference / Robotics

Purchase

View Analyses on Engineering Mechanics of Robotic Arm for Sorting Multi-Materials on the publisher's website for pricing and purchasing information.

Abstract

The study involves static analysis on the developed robotic arm. Increasing loads are applied to the robotic arm to determine the maximum load that it can hold. Firstly, the robotic arm model is created using CATIA. Then, it is analyzed using the generative structural analysis tool in the same software. Increasing loads are applied to the end of the robotic arm until significant deformation occurs. The same procedure is done for modified designs in the analysis software. The results considered include displacement and stress. Based on the results, the critical stress areas are near to the rotating joints of the robotic arm, the back of the gripper and the sharp edge of the second arm. Proposed modifications include increasing the servo motor shaft radius and edge filleting the affected area, increasing the thickness and reducing the length of the gripper base plate, and implementing a new design for the second arm.

The IRMA Community

Research IRM

Analyses on Engineering Mechanics of Robotic Arm for Sorting Multi-Materials

Purchase

Abstract

Related Content

IRMA Sponsors